Duty Boom Stand

I want to start a recording studio in my brick shed. What do i need?

Ive asked this question before but not many responces.
It is mainly just for fun, recording with my band and maybe making a little bit of pocket money. I know ill probably end up not making much money out of it, but id like to try.
The things ive been recommended to buy are:
Microphone: Shure SM57
Mic cables: At least 10 metres
Mic Stand: Heavy duty boom stand
Preamp: Behringer Tube Ultragin Mic200
Mixer: Behringer Xenyx 802 Studio Mixing desk or 1024 mixing desk
Software: Cubase 4
Pop Filter
Studio Headphones: Behringer Hps 3000
Acoustic foam to soundproof the room

As mentioned before it really depends on how far you would like to take this.

A sound board is probably your first line of business. Again depending on how much you want to record will depend on how many channels you will need. Basically 1 channel per microphone and instrument. I use a Mackie 20 channel and it pretty much serves all of the needs I have ever had plus it comes with on board sound effects which can be fun to play with (reverb, phaser, etc). (4 vocals, electric guitar, acoustic guitar, bass guitar, key board, saxaphone, sound effects loops (ipod), and 6 channels for drums (kick, snare, tombs, floor tomb, R & L symbols – of coarse all of this requires more mics and more stands.)

Microphones: SM57 is a good mic for instruments but for recording vocals you will want to use the SM58 it has a fuller richer sound.
Guitars: 2 routes you can take here. The idea is to get the sound into the sound board so that you can control the levels of all of your instruments on the recording. Using a guitar amp is a great way to go. A good tube amp (I would stick with a tube amp – great sound in some of the older higher quality amps) is going to be very expensive (also you will want to make sure the amp has a line out jack so that you can plug it into the sound board if it doesn’t then you have to mic the amp and that can be tricky with feedback and noise bleed through from other instruments. A cheaper and easier way you can go to get started is using a Direct Input box (DI box). For this all you need is the box a 1/4″ instrument cable and an XLR cable (mic cable).

Keyboards: You will need DI boxes to plug into the sound board all of these require XLR cables and 1/4″ instrument cables.

Drums: Mic-ing drums can be a bit tricky. You will need at least 3 mics. You will definitely want to mic the kick and set the other 2 up as right and left side. (somewhere in the center of the sound – so you can catch the symbols, tombs, snare, etc on each side). The best way to mic a drum set is with a drum mic set and clamps. This allows you to mic each tomb and symbol that gives you the greatest control over what you are end product sounds like on the recording, but more mics more cables, more channels on the board. Also, drums can be one of the biggest challenges as far as volume and bleed through into your mics such as vocals. You will want to come up with a way to dampen or isolate them. Plexiglass drum shields work ok, but far better if you can completely encapsulate the drums and control the sound through your drum mics.

I am assuming that you are going to use the computer for recording so your main output from your sound board will go to the computer. If your musicians need to hear each other you will need some sort of monitor system. (Which will require more cabling.) For recording I would recommend an in ear monitor (headphones) rather than a traditional wedge (basically a speaker on the floor pointed at the musician.) due to the level of sound that can build very quickly leading to feedback problems in small recording spaces. The name of the game here is to keep the volume down as much as possible. The louder it gets the harder it is to control mic volume levels, sound bleed through, and echos. That being said, you will want to do something about controlling echos in the room. Brick is a very hard surface that sound is going to jump off of so like someone said earlier in this post foam is a good route for dampening this down. I would even use heavy thick curtains around all of the walls.

If you have any questions along the way feel free to hit me on my email, but I recommend becoming good friends with your local music store. (Not like Circuit City or Radio Shack, somewhere that specializes in concert and recording audio.)

Hope all of this helps.

BAUSCH & LOMB SZ7 MICROSCOPE HEAVY DUTY SK BOOM STAND, $1,250.00

Trinocular Microscope w Heavy Duty Boom Stand & CCD cam $745.00

Trinocular Microscope w Heavy Duty Boom Stand & CCD cam $745.00

New Trinocular Microscopes with heavy duty boom stand $590.00

New Trinocular Microscope w Heavy Duty Boom stand $575.00

New Trinocular Microscope w Heavy Duty Boom stand $575.00

New Trinocular Microscope w Heavy Duty Boom stand $575.00

BAUSCH & LOMB .7-3X POD WITH HEAVY DUTY BOOM STAND $499.99

Manfrotto 085BS Heavy Duty Light Boom Stand with Caster $300.00

HEAVY DUTY STEREO MICROSCOPE EYE PIECES BOOM STAND NEW $279.00

SINGLE-ARM HEAVY DUTY BOOM STAND FOR STEREO MICROSCOPES $224.98

MICROSCOPE BOOM STAND HEAVY DUTY SINGLE-ARM $199.98

QUICK CLEARANCE! HEAVY DUTY BOOM STAND FOR MICROSCOPE $199.00

DOUBLE-ARM HEAVY DUTY BOOM STAND FOR STEREO MICROSCOPES $199.00

DOUBLE-ARM HEAVY DUTY BOOM STAND FOR STEREO MICROSCOPES $199.00

DOUBLE-ARM HEAVY DUTY BOOM STAND FOR STEREO MICROSCOPES $199.00

DOUBLE-ARM HEAVY DUTY BOOM STAND FOR STEREO MICROSCOPES $199.00

HEAVY DUTY ALUMINUM SINGLE-ARM MICROSCOPE BOOM STAND $198.00

SINGLE-ARM HEAVY DUTY BOOM STAND FOR STEREO MICROSCOPES $179.98

ALZO Studio Boom – includes 10′ heavy duty light stand $179.50

HEAVY DUTY ALUMINUM SINGLE-ARM MICROSCOPE BOOM STAND $179.00

LOT of 2 Heavy Duty Photo Video BOOM & Light Stand 501 $159.99

(3) Pearl Heavy Duty Boom Cymbal Stands FREE SHIPPING ! $159.99

HEAVY DUTY STEREO MICROSCOPE STEEL BOOM STAND $159.00

Manfrotto 085BSL Heavy Duty 3- Section Boom w/o Stand $155.00

DW 9700 Heavy Duty Boom Cymbal Stand – DWCP9700 $149.99

Heavy duty Flash Light Boom Support Hold Arm&Stand D8J $141.71

DW 9700 Heavy Duty Straight/Boom Cymbal Stand NEW!!! $139.95

DW 9701 Heavy Duty Low Profile Boom Cymbal Stand $131.99

Pro Heavy duty Light Boom Support Hold Arm & Stand D8J $126.99

D8J Pro Heavy duty Light Boom Support Hold Arm & Stand $126.90

LOT of 2 Heavy Duty Photo Video BOOM & Light Stand 501 $119.99

Drum Workshop 9700 Extra Heavy Duty Boom Cymbal Stand $119.99

LOT of 2 Heavy Duty Photo Video BOOM & Light Stand 501 $115.99

LOT of 2 Heavy Duty Photo Video BOOM & Light Stand 501 $115.99

LOT of 2 Heavy Duty Photo Video BOOM & Light Stand 501 $115.99

LOT of 2 Heavy Duty Photo Video BOOM & Light Stand 501 $115.99

If you are hunting jobs and looking to advance your engineering career in this struggling economy with surplus of workforce and shortage of capital, you must be faced with a lot of challenges. Since engineering recruitment is getting standardized, you have a tough competition to prove yourself. Opportunities are lessening day by day for fresh grads and it’s practically impossible to move up the career ladder when turnover is low and where new openings owe to somebody’s retirement. Getting registered with a good engineering recruitment agency can be a better option, but it won’t work too until you keep yourself updated as per industry standards.

Free advice for you: “The major key to your better “financial” future is you!” it’s actually your attitude that helps you climb the career ladder with no glitch in the way. Below are the seven actions that can help you advance your engineering career with simple changes in your attitude:

Don’t Rush Things:

Always remember, success does not come overnight and there is no shortcut to achieve a vibrant career boom. You have to be patient, show endurance, and a lot of hard work to reach that top level which you can term as your career peak. Moving slow and consistently does not mean you are a failure and you need to drastically pace up things, but you sure should worry when things have abruptly halted

Set Goals Initially:

Setting long-term goals and devising strategies to reach those goals is extremely important for a good career growth in the field of engineering. If you see yourself at the same point you were five years back, it means you need to change your approach and affix some goals for yourself. Identify the top most level you want to reach and put all your strength and heart in achieving that level.

Broaden the horizons of your career

Attending engineering trainings and workshops help you learn the additional things regarding your field and can prove helpful in extending your career opportunities. Learn as much as you can, contact mentors for career advice, stretch yourself by opting projects you haven’t undertaken before. All such actions will increase your professional knowledge and help in broadening your career.

Stand out of the crowd

In order to survive and get yourself recognized in this competitive environment, you need to employ innovative approach in everything you do. Work methods you think are going to distinguish you from the rest. Becoming certified in something that is valued by employers in your particular field of engineering will help you make more money than an average college grad.

Plan, prioritize and organize your work

Whatever you do, do it with responsibility and organization. Plan out the entire task before you proceed further with it, this will save you from later disappointments.

Go beyond the call of duty

As mentioned earlier, it’s the attitude that makes the actual difference. How well you perform tasks is your duty, but how well you are in general behavior is the real you. Be friendly and helpful towards your colleagues; keep good relationship with your boss, show active participation in tasks other than your job like organizing your company’s annual day event, publishing your article in company’s magazine etc.

Understand how your organization ticks

Learn the corporate culture within the company you are working, including the values, modus operandi, and its personalities. Once you are familiar with the company’s working, you’ll take no time in figuring out all that it takes to get promoted.

If you are looking for tips to hit on your career by getting engineering jobs in a profound company, please feel free to contact PeopleTek for complete guidance and support. We have a number of companies aligned who might just be looking for your talent.

About the Author:

About Author:
Bryan has an extensive experience of business process outsourcing. If you have any question regarding outsourcing engineering jobs or finding an onshore or offshore engineering recruitment agency, Bryan can guide you well for best engineering recruitment solutions.

Article Source: ArticlesBase.com – 7 Ways to Advance Your Engineering Career